Search
Close this search box.

How to make 360 degree round waterproof lighting

When it comes to threading LED light strips through silicone neon tubes, the process can vary based on the length of the tube. Here’s a breakdown of the methods used for different lengths:

For 1-3 Meter Tubes:

  • The traditional and practical method involves utilizing the internal line within the silicone tube to wrap and secure the LED light strip. With this method, one person can easily handle the operation without encountering unexpected issues.

For Tubes Longer Than 3 Meters:

  • When dealing with longer tubes, there is a higher risk of the internal line breaking or getting stuck during the pulling process. This can lead to inefficiencies and often requires two individuals working together to complete the task.
  • To overcome challenges with longer silicone neon tubes, it is recommended to use a third-party tool for assistance.

For Tubes Exceeding 3 Meters:

  • To address the difficulty of threading LED light strips through tubes longer than 3 meters, consider using an air compressor with an air nozzle. This setup helps flatten the tube and light strip to prevent bending and potential damage during insertion.
  • The operator at the front end should secure the line to the LED light strip conventionally. Meanwhile, the operator at the rear end can utilize the rigidity of the PCB light strip to insert a section into the inner tube of the silicone neon tube.
  • By directing high-pressure air through the air nozzle towards the inner tube of the silicone neon tube, the internal line will straighten out due to the force of the compressed air. This method allows for easier extraction of the line at the rear end by pulling gently.

By employing these techniques and tools, such as air compressors and careful handling, the challenge of threading LED light strips through excessively long silicone neon tubes can be effectively addressed, ensuring a smoother and more efficient installation process.

Silicone LED Tube Link:

https://www.yiford.com/product/shop-topeview-sideview-silicone-led-channel-system/

How to make 360 degree round waterproof lighting
D22 Matel end cap 1
D22 6

Materials Needed:

  • LED Light Strips
  • Silicone Tubes
  • End Caps with and without holes
  • Power Cable
  • Cotton Thread

Step-by-Step Guide:

  1. Prepare Materials: Gather all the required materials, including LED light strips, silicone tubes, end caps, power cables, and cotton thread.
  2. Customize LED Strips: Connect the LED light strips to achieve the desired length, such as 5 meters. For creating a 360-degree illumination effect, solder two identical lengths of LED strips together, back-to-back, and connect them in parallel with a power cable.
  3. Test LED Strips: Before inserting the LED strips into the silicone tube, test them to ensure they are functioning correctly.
  4. Insert Cotton Thread: Tie a cotton thread to the end of the LED strip and insert it into the silicone tube. The length of the cotton thread should be longer than the silicone tube.
  5. Insert LED Strips: Using a compressor’s air nozzle, blow air through the cotton thread to push it into the silicone tube. As the cotton thread emerges from the other end of the tube, gently pull it to guide the LED light strips smoothly into the tube.
  6. Final Testing: Once the LED strips are fully inserted into the silicone tube, test them again to confirm they are working correctly.
  7. Install End Caps: If everything is in working order, securely install the end caps on both ends of the silicone tube to seal the waterproof lighting setup.

DIY Assembly or Custom Production:

YIFORD offers a complete set of materials for customers to assemble their own neon light strips or provides customization services for pre-assembled products according to customer specifications. Whether you prefer DIY projects or require ready-made solutions, YIFORD has you covered.

Create Your Own Neon Lighting Masterpiece:

With these simple steps, you can now create your own 360-degree round waterproof lighting using LED light strips and silicone tubes. Whether you want to add a touch of magic to your home decor or enhance a special event with captivating lighting effects, this DIY process allows you to unleash your creativity and customize your lighting design to suit your unique style. Contact YIFORD today to explore the full range of materials and start crafting your dream lighting setup.


You may also like

What's COB LED Strips Lighting Features and Advantages?
/
516 views
COB LED Strips Lighting Features And Advantages What's cob led strips lighting features and advantages? this video will show you a parts of them. after ...
waterproof cob led strips
/
248 views
Put waterproof cob led strips light on your little fish tank. It can make your aquarium more charming! Can also play the role of decorative lights. Even the little fish like it very much!
color change cct led strip lights
/
216 views
Tunable white led strip Review, color temperature adjustable CCT lighting
Page 1 of 16
购物车
en_USEnglish
滚动至顶部
Let’s Collaborate
We’d love to hear from you
How to make 360 degree round waterproof lighting