What Should I Pay Attention To When Customizing LED Strips? / Yiford

What should I pay attention to when customizing LED strips?

Because of its high brightness and low energy consumption, LED light strips are often used in building decoration, advertising light boxes, jewelry display stands and other constant-light equipment, but what aspects should be considered when customizing LED Strips light?

1. Mire las juntas de soldadura.

The LED light bar produced by the regular LED light bar manufacturer is produced by SMT chip technology, using solder paste and reflow soldering process. Therefore, the solder joints on the LED light bar are relatively smooth and the amount of solder is small, and the solder joints extend from the FPC pad to the LED electrode in an arc shape. However, the solder joints of the fake version of LED light bars are not uniform, and most of them appear as a dot to cover the solder feet, and at the same time there will be different degrees of tin tips, which is a typical phenomenon of manual soldering.

2. Mire la calidad de FPC.

FPC se divide en dos tipos: cobre y cobre laminado. La lámina de cobre del tablero revestido de cobre sobresale. Si mira de cerca, se puede ver desde la conexión entre la almohadilla y el FPC. El cobre laminado está estrechamente conectado al FPC y se puede doblar a voluntad sin que se caiga la almohadilla. Si la placa revestida de cobre se dobla demasiado, la almohadilla se caerá y si la temperatura es demasiado alta durante el mantenimiento, la almohadilla se caerá.

3. Mire la limpieza de la superficie de la tira de LED.

If the LED light bar produced by SMT process is used, the cleanliness of the surface is very good, and no impurities and stains can be seen. However, if the counterfeit LED light bar is produced by hand soldering process, no matter how it is cleaned, there will be stains and cleaning marks on the surface, and there will be flux and tin residue on the surface of the FPC.