Sök
Stäng denna sökruta.

Bästa belysningen här

Allt du vill kan hittas här

76# LED Strips connector 8mm 3pin strip to wire to strip

5/5

bästa pris

Fabriks direktpris

senaste teknologin

ny produktionsprocess

Bästa efter försäljning

Fabriks teknisk service

Vill du köpa nu? Handla här, tusentals produkter online.

76# LED Strips connector 8mm 3pin strip to wire to strip

Beskrivning

led strip lights connector

IP20 Mini Crystal Series

NEJ.ARTIKELNUMMER.NEJ.ARTIKELNUMMER.NEJ.ARTIKELNUMMER.NEJ.ARTIKELNUMMER.
1#HR-S-SC-2PIN-5MM-B2#HR-S-SC-2PIN-5MM-A3#HR-S-SC-2PIN-5MM-C4#HR-S-SC-2PIN-5MM-D
5#HR-S-SC-3PIN-5MM-B6#HR-S-SC-3PIN-5MM-A7#HR-S-SC-3PIN-5MM-C8#HR-S-SC-3PIN-5MM-D
9#HR-S-SC-2PIN-8MM-B10#HR-S-SC-2PIN-8MM-A11#HR-S-SC-2PIN-8MM-C12#HR-S-SC-2PIN-8MM-D
13#HR-S-SC-3PIN-8MM-B14#HR-S-SC-3PIN-8MM-A15#HR-S-SC-3PIN-8MM-C16#HR-S-SC-3PIN-8MM-D
17#HR-S-SC-4PIN-8MM-B18#HR-S-SC-4PIN-8MM-A19#HR-S-SC-4PIN-8MM-C20#HR-S-SC-4PIN-8MM-D
21#HR-S-SC-2PIN-10MM-B22#HR-S-SC-2PIN-10MM-A23#HR-S-SC-2PIN-10MM-C24#HR-S-SC-2PIN-10MM-D
25#HR-S-SMD-2PIN-10MM-B26#HR-S-SMD-2PIN-10MM-A27#HR-S-SMD-2PIN-10MM-C28#HR-S-SMD-2PIN-10MM-D
29#HR-S-SMD-3PIN-10MM-B30#HR-S-SMD-3PIN-10MM-A31#HR-S-SMD-3PIN-10MM-C32#HR-S-SMD-3PIN-10MM-D
33#HR-S-COB-3PIN-10MM-B34#HR-S-COB-4PIN-10MM-A35#HR-S-COB-3PIN-10MM-C36#HR-S-COB-4PIN-10MM-D
37#HR-S-COB-4PIN-10MM-B34#HR-S-COB-4PIN-10MM-A38#HR-S-COB-4PIN-10MM-C36#HR-S-COB-4PIN-10MM-D
39#HR-S-SMD-4PIN-10MM-B40#HR-S-SMD-4PIN-10MM-A41#HR-S-SMD-4PIN-10MM-C42#HR-S-SMD-4PIN-10MM-D
43#HR-S-SMD-5PIN-10MM-B44#HR-S-SMD-5PIN-10MM-A45#HR-S-SMD-5PIN-10MM-C46#HR-S-SMD-5PIN-10MM-D
47#HR-S-SMD-2PIN-12MM-B48#HR-S-SMD-2PIN-12MM-A49#HR-S-SMD-2PIN-12MM-C50#HR-S-SMD-2PIN-12MM-D
51#HR-S-SMD-3PIN-12MM-B52#HR-S-SMD-3PIN-12MM-A53#HR-S-SMD-3PIN-12MM-C54#HR-S-SMD-3PIN-12MM-D
55#HR-S-SC-4PIN-12MM-B56#HR-S-SC-4PIN-12MM-A57#HR-S-SC-4PIN-12MM-C58#HR-S-SC-4PIN-12MM-D
59#HR-S-SMD-5PIN-12MM-B60#HR-S-SMD-5PIN-12MM-A61#HR-S-SMD-5PIN-12MM-C62#HR-S-SMD-5PIN-12MM-D
63#HR-S-COB-5PIN-12MM-B64#HR-S-COB-5PIN-12MM-A65#HR-S-COB-5PIN-12MM-C66#HR-S-COB-5PIN-12MM-D
67#HR-S-SMD-6PIN-12MM-B68#HR-S-SMD-6PIN-12MM-A69#HR-S-SMD-6PIN-12MM-C70#HR-S-SMD-6PIN-12MM-D
115#HR-S-SC-2PIN-8MM-E116#HR-S-SMD-6PIN-12MM-E

Waterproof Series

NEJ.ARTIKELNUMMER.NEJ.ARTIKELNUMMER.NEJ.ARTIKELNUMMER.
71#HR-IP-SC-2PIN-8MM-B
72#HR-IP-SC-2PIN-8MM-A73#HR-IP-SC-2PIN-8MM-C
74#HR-IP-SC-3PIN-8MM-B75#HR-IP-SC-3PIN-8MM-A76#HR-IP-SC-3PIN-8MM-C
77#HR-IP-SC-2PIN-10MM-B78#HR-IP-SC-2PIN-10MM-A79#HR-IP-SC-2PIN-10MM-C
80#HR-IP-SMD-2PIN-10MM-B81#HR-IP-SMD-2PIN-10MM-A82#HR-IP-SMD-2PIN-10MM-C
83#HR-IP-SMD-3PIN-10MM-B84#HR-IP-SMD-3PIN-10MM-A85#HR-IP-SMD-3PIN-10MM-C
86#HR-IP-COB-3PIN-10MM-B87#HR-IP-COB-4PIN-10MM-A88#HR-IP-COB-3PIN-10MM-C
89#HR-IP-COB-4PIN-10MM-B87#HR-IP-COB-4PIN-10MM-A90#HR-IP-COB-4PIN-10MM-C
91#HR-IP-SMD-4PIN-10MM-B92#HR-IP-SMD-4PIN-10MM-A93#HR-IP-SMD-4PIN-10MM-C
94#HR-IP-SMD-5PIN-10MM-B95#HR-IP-SMD-5PIN-10MM-A96#HR-IP-SMD-5PIN-10MM-C
97#HR-IP-SMD-2PIN-12MM-B98#HR-IP-SMD-2PIN-12MM-A99#HR-IP-SMD-2PIN-12MM-C
100#HR-IP-SMD-3PIN-12MM-B101#HR-IP-SMD-3PIN-12MM-A102#HR-IP-SMD-3PIN-12MM-C
103#HR-IP-SC-4PIN-12MM-B104#HR-IP-SC-4PIN-12MM-A105#HR-IP-SC-4PIN-12MM-C
106#HR-IP-COB-5PIN-12MM-B107#HR-IP-COB-5PIN-12MM-A108#HR-IP-COB-5PIN-12MM-C
109#HR-IP-SMD-5PIN-12MM-B110#HR-IP-SMD-5PIN-12MM-A111#HR-IP-SMD-5PIN-12MM-C
112#HR-IP-SMD-6PIN-12MM-B113#HR-IP-SMD-6PIN-12MM-A114#HR-IP-SMD-6PIN-12MM-C

Spec for Waterproof Puncture Version led strip

Strip to Strip with wires Series

Strip to wires Series

Waterproof puncture series light strip connector is a transparent PC material connector, mainly suitable for casing waterproof led strip/full glue filling led strip/silicone extrusion led strip. It has the characteristics of easy installation, reliable connection, glue-free connection and reusability.

1. Naming Rule

??1

2. Item No. (Strip to Wires [with 15cm wires ] )

3

71# HR-IP-SC-2PIN-8MM-B

Strip-to-wires, mainly suitable for waterproof COB & SMD strips, 8mm PCB, 2PIN, 20AWG

4

74# HR-IP-SC-3PIN-8MM-B

Strip-to-wires, mainly suitable for waterproof COB & SMD strips, 8mm PCB, 3PIN, 20AWG

5

77# HR-IP-SC-2PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD&COB strips, 10mm PCB, 2PIN , 20AWG

6

80# HR-IP-SMD-2PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 2PIN , 20AWG

7

83# HR-IP-SMD-3PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 3PIN , 20AWG

8

86# HR-IP-COB-3PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 10mm PCB, 3PIN CCT color , 20AWG

9

89# HR-IP-COB-4PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 4PIN RGB color , 20AWG

10

91# HR-IP-SMD-4PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 4PIN , 20AWG

11

94# HR-IP-SMD-5PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 5PIN , 20AWG

12

97# HR-IP-SMD-2PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 2PIN , 20AWG

13

100# HR-IP-SMD-3PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 3PIN , 20AWG

14

103# HR-IP-SC-4PIN-12MM-B

Strip-to-wires, mainly suitable for waterproof COB & SMD strips, 12mm PCB, 4PIN, 20AWG

15

106# HR-IP-COB-5PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 12mm PCB, 5PIN , 20AWG

16

109# HR-IP-SMD-5PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 5PIN , 20AWG

17

112# HR-IP-SMD-6PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 6PIN , 20AWG

3. Item No. (Strip to Strip [with 15cm wires ] )

18

73# HR-IP-SC-2PIN-8MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB & SMD strips, 8mm width PCB, 2PIN , 20AWG

19

76# HR-IP-SC-3PIN-8MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB & SMD strips, 8mm width PCB, 3PIN , 20AWG

20

79# HR-IP-SC-2PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB & SMD strips, 10mm width PCB, 2PIN , 20AWG

21

82# HR-IP-SMD-2PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 2PIN , 20AWG

22

85# HR-IP-SMD-3PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 3PIN , 20AWG

23

88# HR-IP-COB-3PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 10mm PCB, 3PIN CCT color , 20AWG

24

90# HR-IP-COB-4PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 10mm PCB, 4PIN RGB color , 20AWG

25

93# HR-IP-SMD-4PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 4PIN , 20AWG

26

96# HR-IP-SMD-5PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 5PIN , 20AWG

27

102# HR-IP-SMD-3PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 3PIN , 20AWG

28

105# HR-IP-SC-4PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB & SMD strips, 12mm width PCB, 4PIN , 20AWG

29

108# HR-IP-COB-5PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 12mm PCB, 5PIN , 20AWG

30

111# HR-IP-SMD-5PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 5PIN , 20AWG

31

114# HR-IP-SMD-6PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 6PIN , 20AWG

4. Product advantages

32

COB Series

33

SMD Series

34

COB Series

35

SMD Series

36

COB Series

37

SMD Series

5. Instruction

  1. Prepare led strip
42
  1. Take the COB light strip 2PIN as an example, the middle of the exposed copper foil is cut and broken
43
  1. Push the led strip into the bottom of the transparent plastic core slot.
44
  1. After the transparent rubber core is loaded into the notches on both sides of the shell, press it from top to bottom, and press the transparent rubber core with the light strip down until the two sides of the shell are buckled upside down to be qualified.
45 1
  1. Finished

Note: The led strip should be pushed into the bottom of the transparent plastic core and then pressed and pierced for conduction. If it is not in place, it may not be connected.

46 1
  1. COB type installation finished product, the other side of the double-ended connector is installed and pressed in the same way.
47

Note: For SMD-5PIN and 6PIN products, due to the large number of PINs, the pressing force is large, and auxiliary tools can be used to clamp them (the clamping position should not be at the terminal position, but should be at the edge of the transparent plastic core).

48

Finished images for SMD

Note: The picture shows the operation of COB-2pin model, and the operation of COB&SMD 2~6pin products is the same as this method.

6. Description of technical parameters:

6.1 Technical requirements

Rated current: AWG20 6A Max, AWG22 4A Max

Rated voltage: 5V/9V/12V/18V/24V/36V/48V

Withstand voltage: 500V

Temperature resistance: 80?

Working temperature: -20? ~ +80?

Salt spray test: neutral salt spray 24H

Allowable humidity: 15%~90%

Applicable light strip specifications: bare board COB light strip, or bare board SMD light strip with PIN pin spacing adapted

6.2 Yiford PCB Circuit Laying Rules

?Before purchasing connectors, please ensure that the led strip meets the following wiring requirements. Customer complaints caused by PCB wiring problems are not covered by the warranty.?:

  • No.1 copper foil design needs to be laid in a straight line within this range;
  • No.2 Cut the middle line;
  • No.3 copper foil center distance design, the center symmetry with the outer width of the light strip is 0.2 Max;
  • No.4 light strip design thickness 0.30 Max
  • No.5 lamp beads allow the maximum height, the tolerance range is ±0.2;
  • No.6 total height after sticking adhesive: 0.55±0.1;
  • No. 7 Minimum size of lamp bead laying position;
  • No. 8 Design requirements for the outer width of the light strip;

All lamp beads and the outer width of the lamp strip have a center symmetry of 0.5 Max;

49

HR-S-SC-5MM-2PIN

50

HR-S-SC-8MM-2PIN

51

HR-S-SC-10MM-2PIN

52

HR-S-SMD-10MM-3PIN

53

HR-S-COB-10MM-3PIN

54

HR-S-COB-10MM-4PIN

55

HR-S-SMD-10MM-4PIN

56

HR-S-SMD-10MM-5PIN

57

HR-S-SMD-12MM-5PIN

58

HR-S-SMD-12MM-6PIN

7. Product Size

7.1 8mm Strip to wires 2PIN?HR-IP-SC-2PIN-8MM-B?

59

7.2 Strip to strip (With 15cm wires) 2PIN?HR-IP-SC-2PIN-8MM-C?

60

7.3 10mm series single-ended connectors (see Table 1 for model numbers)

61
62
63

Note:

  1. 1.The marked view is the SMD-4PIN benchmark, and other products have the same dimensions except for the number of PINs;
  2. Each product has a shell with a transparent plastic core, according to the SMD-4PIN example, other products are the same

7.4 10mm Series (Strip to Strip with wires)

64
65
66

Note:

  1. 1.The marked view is the SMD-4PIN benchmark, and other products have the same dimensions except for the number of PINs;
  2. Each product has 1 shell with 2 transparent plastic cores, according to the SMD-4PIN example, other products are the same

SMD 12mm Strip to wires

SMD-5PIN?HR-IP-SMD-5PIN-12MM-B

SMD-6PIN?HR-IP-SMD-6PIN-12MM-B

67

Note:

  1. 1.The marked view is the 5PIN benchmark, and the 6PIN is the same except for the number of PINs;
  2. Each product has a shell with a transparent plastic core, according to the SMD-5PIN example, the 6PIN products are the same

SMD 12mm Strip to Strip with 15cm wires

SMD-5PIN?HR-IP-SMD-5PIN-12MM-C

SMD-6PIN?HR-IP-SMD-6PIN-12MM-C

68

Note:

  1. 1.The marked view is the 5PIN benchmark, and the 6PIN is the same except for the number of PINs;
  2. Each product has 1 shell with 2 transparent plastic cores, according to the SMD-5PIN example, the 6PIN products are the same

If you want to know more about light strips, you can follow my Youtube channel or facebook. Of course, you can also email us directly.

Kundrecension

Erik Trevino
Erik Trevino
Ingenjörschef
Läs mer
Tidigare gick det mycket material till spillo vid montering av ljuslisten, eftersom svetsning efter klippning är en mycket besvärlig sak. Eftersom kontakten på YIFORD används, slösas inte material längre, och installationstid och arbetskostnader sparas. Tack YIFORD för dess bra produkter, som är mycket användbara.
Peter Dickerson
Peter Dickerson
vd
Läs mer
Jag kan inte helt uttrycka hur fantastiska dessa lampor är! vi köpte 24v cob led strips med led kanalsystem, det fungerar som förväntat, ganska ljust, bra färgåtergivning, ytan är med snygg beläggning, att den sprider ljuset lite. Våra ingenjörer älskar det så mycket! Bra värde! De är riktigt ljusa utarbetade, bra för mitt projekt Är vad du betalar vad du får här Utmärkt produkt.
Bill Hiskett
Bill Hiskett
Inköpschef
Läs mer
Vi är en Rumänien professionell led-belysningsdistributör, företaget har 12 års verksamhetshistoria. Våra många kunder använder ledstrips i köksskåpet, bilar, vardagsrum, trappor, kontor, etc. Och många av dem behöver led-ljustillbehör. Det är väldigt glad att hitta Yiford, de ger oss utvecklade mycket professionell service och kvalitetsprodukter. Om du behöver led-ljusremsor i grossistledet från Kina? Yiford är en av de bästa tillverkarna av led-ljus i Kina.
Jason Moeller
Jason Möller
Byggnadskonstruktör
Läs mer
Vi gör många projekt för köpcentra, affärsshowrooms i Europa. Ibland behöver projektet många anpassningsprodukter. såsom cob led strip lampor och led aluminium profil. behöver olika storlekar, olika watt, olika led tillbehör. Yiford är en professionell led-tillverkare. De har tålamod för mina beställningar. Oavsett om det gäller kylfläns-aluminium, led-aluminiumextruderingsprodukter, diffusorkåpa, ändstycken och monteringstillbehör för linjärt led-ljus. De kan göra det bra.
Dylan Bowles
Dylan Bowles
Tillverkningsdesigner
Läs mer
Vi tillverkar led rumsbelysning i Storbritannien. Genom 5 års samarbete vet vi att Yiford är en pålitlig tillverkare av led rumsljus i Kina. De kan erbjuda samma behållare med samma färg LED-lampor i alla dina beställningar. Yiford har superfina led strips, det kallas COB led strip lights, annorlunda med SMD led strips, det är ljusare, med konsekvent belysning, bättre belysning effektiv, med Yiford lödfria kontakter, så lätt att installera i våra produkter, bra kvalitet kontroll låt oss framför kunder vann mer ära. Tack!
Michael Feron
Michael Feron
Ljusfördelare
Läs mer
Jag köper flexibla cob led strip ljus och led kanalsystem från Yiford så många gånger. Vi har många coola led-list-idéer från Yiford. Det är bra gjort enligt min begäran. Ibland behöver ett projekt många led-ljustillbehör, såsom led-kontakt, led-kontroller, led-strömförsörjning, silikonled-kanalsystem, led-aluminiumprofil. Specialdesign, OEM-etikett, allt fungerar utmärkt. Vi anser Yiford som en bra led-ljusleverantör.
Föregående
Nästa
Varukorg
sv_SESwedish
Rulla till toppen

Låt oss samarbeta

Vi skulle älska att höra från dig
76# LED Strips connector 8mm 3pin strip to wire to strip