The latest innovative design, patented products
LED light strip connection solution
Solve the problem of arbitrary connection of soft light bars
Quick solderless connector
No-stripping wire insulation
Transparent shell, better light transmission
For COB led strip lights
COB light strip is the latest type of light-emitting light strip.
It has hundreds of light-emitting chips per meter, with uniform light emission, no light spots, no dark areas, and higher brightness…
For SMD LED Strip Lights
Most of the light strips on the market belong to SMD light strips.
There are many models, SMD2835, SMD5050, SMD3014….
Mini Crystal LED Strip Connector –Strip to Wires DIY
IP20 Mini Crystal Series
[table id=1 /]
Waterproof Series
[table id=2 /]
Specification for Mini Crystal LED Strip Connector
Strip to Wires DIY Series
Mini Crystal LED strip connector is a transparent PC material connector, mainly suitable for IP20 COB & SMD strip with matching pads. It has the characteristics of reliable connection, invisible seamless lighting, perfect solution for aluminum profile application, and DIY connection without stripping.
1. Naming Rule
2. Item No.
1# HR-S-SC-2PIN-5MM-B
Strip to 15cm Wires, mainly suitable for IP20 COB & SMD strips, 5mm width PCB, 15CM 22AWG Wires, 2PIN single color
9# HR-S-SC-2PIN-8MM-B
Strip to 15cm Wires, mainly suitable for IP20 COB & SMD strips, 8mm width PCB, 15CM 22AWG Wires, 2PIN single color
13# HR-S-SMD-3PIN-8MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 8mm width PCB, 15CM 20AWG Wires, 3PIN CCT color
17# HR-S-SMD-4PIN-8MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 8mm width PCB, 15CM 20AWG Wires, 4PIN RGB color
21# HR-S-SC-2PIN-10MM-B
Strip to 15cm Wires, mainly suitable for IP20 COB & SMD strips, 10mm width PCB, 15CM 22AWG Wires, 2PIN single color
r
25# HR-S-SMD-2PIN-10MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 10mm width PCB, 15CM 20AWG Wires, 2PIN single color
29# HR-S-SMD-3PIN-10MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 10mm width PCB, 15CM 20AWG Wires, 3PIN CCT color
33# HR-S-COB-3PIN-10MM-B
Strip to 15cm Wires, mainly suitable for IP20 COB strips, 10mm width PCB, 15CM 22AWG Wires, 3PIN CCT color
37# HR-S-COB-4PIN-10MM-B
Strip to 15cm Wires, mainly suitable for IP20 COB RGB strips, 10mm width PCB, 15CM 22AWG Wires, 4PIN RGB color
39# HR-S-SMD-4PIN-10MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 10mm width PCB, 15CM 20AWG Wires, 4PIN RGB color
43# HR-S-SMD-5PIN-10MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 10mm width PCB, 15CM 20AWG Wires, 5PIN RGBW color
47# HR-S-SMD-2PIN-12MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires, 2PIN single color
51# HR-S-SMD-3PIN-12MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires,3PIN CCT color
55# HR-S-SC-4PIN-12MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires, 5PIN RGBW color
59# HR-S-SMD-5PIN-12MM-B
Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires, 5PIN RGBW color
63# HR-S-COB-5PIN-12MM-B
Strip to 15cm Wires, mainly suitable for IP20 COB strips, 12mm width PCB, 15CM 20AWG Wires, 5PIN RGBW color
3. Product advantages
High transparent PC material, good light transmission.
Unique non-stripping wire puncture connection design
Guide slot introduction, anti-shake, more reliable fixed connection.
4. Instruction
(The picture shows the 2pin operation, refer to this The operation of 3~6pin products is the same.)
- Prepare led strip
- Cut the led strip along the pad
- Prepare wires
- Push the strip and cable from two side
- Push to the end
- Use pliers to clamp the terminal to the level of the plastic surface , the operation is unilateral operation, clamp one side and then operate the other side.
- Finished
Specifications for cables:
- 2~3pin products use AWG20 cable, outer diameter: 1.8±0.1mm;
- 4~6pin products use AWG22 cable, outer diameter: 1.6±0.1mm;
- COB-5mm 2pin use AWG22 cable
5. Technical Parameters
5.1 Product parameters
- Rated Current: 6A Max
- Rated voltage: 5V/9V/12V/18V/24V/36V/48V
- Withstand voltage: 500V
- Temperature resistance: 105℃
- Working temperature: -20℃ ~ +80℃
- Salt spray test: neutral salt spray 24H
- Allowable humidity: 15%~90%
- Applicable strip specifications: IP20 SMD & COB strip
5.2 Yiford PCB Circuit Laying Rules
（Before purchasing connectors, please ensure that the led strip meets the following wiring requirements. Customer complaints caused by PCB wiring problems are not covered by the warranty.）:
- No.1 copper foil design needs to be laid in a straight line within this range;
- No.2 Cut the middle line;
- No.3 copper foil center distance design, the center symmetry with the outer width of the light strip is 0.2 Max;
- No.4 light strip design thickness 0.30 Max
- No.5 lamp beads allow the maximum height, the tolerance range is ±0.2;
- No.6 total height after sticking adhesive: 0.55±0.1;
- No. 7 Minimum size of lamp bead laying position;
- No. 8 Design requirements for the outer width of the light strip;
All lamp beads and the outer width of the lamp strip have a center symmetry of 0.5 Max;
HR-S-SC-5MM-2PIN
HR-S-SC-8MM-2PIN
HR-S-SC-10MM-2PIN
HR-S-SMD-10MM-3PIN
HR-S-COB-10MM-3PIN
HR-S-COB-10MM-4PIN
HR-S-SMD-10MM-4PIN
HR-S-SMD-10MM-5PIN
HR-S-SMD-12MM-5PIN
HR-S-SMD-12MM-6PIN
6. Product Size
COB 5mm Strip to Wires 2PIN（HR-S-SC-2PIN-5MM-D）
COB 8mm Strip to Wires 2PIN（HR-S-SC-2PIN-8MM-D）
10mm Series: Strip to Wires
COB/SMD-2PIN：HR-S-SC-2PIN-10MM-D
SMD 12mm Strip to Wires
SMD-5PIN：HR-S-SMD-5PIN-12MM-D
SMD-6PIN：HR-S-SMD-6PIN-12MM-D
Note: The marked view is the 5PIN benchmark, and the 6PIN is the same except for the number of PINs;