led strip lights connector

IP20 Mini Crystal Series

EI.	TUOTE NRO.	EI.	TUOTE NRO.	EI.	TUOTE NRO.	EI.	TUOTE NRO.
1#	HR-S-SC-2PIN-5MM-B	2#	HR-S-SC-2PIN-5MM-A	3#	HR-S-SC-2PIN-5MM-C	4#	HR-S-SC-2PIN-5MM-D
5#	HR-S-SC-3PIN-5MM-B	6#	HR-S-SC-3PIN-5MM-A	7#	HR-S-SC-3PIN-5MM-C	8#	HR-S-SC-3PIN-5MM-D
9#	HR-S-SC-2PIN-8MM-B	10#	HR-S-SC-2PIN-8MM-A	11#	HR-S-SC-2PIN-8MM-C	12#	HR-S-SC-2PIN-8MM-D
13#	HR-S-SC-3PIN-8MM-B	14#	HR-S-SC-3PIN-8MM-A	15#	HR-S-SC-3PIN-8MM-C	16#	HR-S-SC-3PIN-8MM-D
17#	HR-S-SC-4PIN-8MM-B	18#	HR-S-SC-4PIN-8MM-A	19#	HR-S-SC-4PIN-8MM-C	20#	HR-S-SC-4PIN-8MM-D
21#	HR-S-SC-2PIN-10MM-B	22#	HR-S-SC-2PIN-10MM-A	23#	HR-S-SC-2PIN-10MM-C	24#	HR-S-SC-2PIN-10MM-D
25#	HR-S-SMD-2PIN-10MM-B	26#	HR-S-SMD-2PIN-10MM-A	27#	HR-S-SMD-2PIN-10MM-C	28#	HR-S-SMD-2PIN-10MM-D
29#	HR-S-SMD-3PIN-10MM-B	30#	HR-S-SMD-3PIN-10MM-A	31#	HR-S-SMD-3PIN-10MM-C	32#	HR-S-SMD-3PIN-10MM-D
33#	HR-S-COB-3PIN-10MM-B	34#	HR-S-COB-4PIN-10MM-A	35#	HR-S-COB-3PIN-10MM-C	36#	HR-S-COB-4PIN-10MM-D
37#	HR-S-COB-4PIN-10MM-B	34#	HR-S-COB-4PIN-10MM-A	38#	HR-S-COB-4PIN-10MM-C	36#	HR-S-COB-4PIN-10MM-D
39#	HR-S-SMD-4PIN-10MM-B	40#	HR-S-SMD-4PIN-10MM-A	41#	HR-S-SMD-4PIN-10MM-C	42#	HR-S-SMD-4PIN-10MM-D
43#	HR-S-SMD-5PIN-10MM-B	44#	HR-S-SMD-5PIN-10MM-A	45#	HR-S-SMD-5PIN-10MM-C	46#	HR-S-SMD-5PIN-10MM-D
47#	HR-S-SMD-2PIN-12MM-B	48#	HR-S-SMD-2PIN-12MM-A	49#	HR-S-SMD-2PIN-12MM-C	50#	HR-S-SMD-2PIN-12MM-D
51#	HR-S-SMD-3PIN-12MM-B	52#	HR-S-SMD-3PIN-12MM-A	53#	HR-S-SMD-3PIN-12MM-C	54#	HR-S-SMD-3PIN-12MM-D
55#	HR-S-SC-4PIN-12MM-B	56#	HR-S-SC-4PIN-12MM-A	57#	HR-S-SC-4PIN-12MM-C	58#	HR-S-SC-4PIN-12MM-D
59#	HR-S-SMD-5PIN-12MM-B	60#	HR-S-SMD-5PIN-12MM-A	61#	HR-S-SMD-5PIN-12MM-C	62#	HR-S-SMD-5PIN-12MM-D
63#	HR-S-COB-5PIN-12MM-B	64#	HR-S-COB-5PIN-12MM-A	65#	HR-S-COB-5PIN-12MM-C	66#	HR-S-COB-5PIN-12MM-D
67#	HR-S-SMD-6PIN-12MM-B	68#	HR-S-SMD-6PIN-12MM-A	69#	HR-S-SMD-6PIN-12MM-C	70#	HR-S-SMD-6PIN-12MM-D
115#	HR-S-SC-2PIN-8MM-E	116#	HR-S-SMD-6PIN-12MM-E

Waterproof Series

EI.	TUOTE NRO.	EI.	TUOTE NRO.	EI.	TUOTE NRO.
71#	HR-IP-SC-2PIN-8MM-B	72#	HR-IP-SC-2PIN-8MM-A	73#	HR-IP-SC-2PIN-8MM-C
74#	HR-IP-SC-3PIN-8MM-B	75#	HR-IP-SC-3PIN-8MM-A	76#	HR-IP-SC-3PIN-8MM-C
77#	HR-IP-SC-2PIN-10MM-B	78#	HR-IP-SC-2PIN-10MM-A	79#	HR-IP-SC-2PIN-10MM-C
80#	HR-IP-SMD-2PIN-10MM-B	81#	HR-IP-SMD-2PIN-10MM-A	82#	HR-IP-SMD-2PIN-10MM-C
83#	HR-IP-SMD-3PIN-10MM-B	84#	HR-IP-SMD-3PIN-10MM-A	85#	HR-IP-SMD-3PIN-10MM-C
86#	HR-IP-COB-3PIN-10MM-B	87#	HR-IP-COB-4PIN-10MM-A	88#	HR-IP-COB-3PIN-10MM-C
89#	HR-IP-COB-4PIN-10MM-B	87#	HR-IP-COB-4PIN-10MM-A	90#	HR-IP-COB-4PIN-10MM-C
91#	HR-IP-SMD-4PIN-10MM-B	92#	HR-IP-SMD-4PIN-10MM-A	93#	HR-IP-SMD-4PIN-10MM-C
94#	HR-IP-SMD-5PIN-10MM-B	95#	HR-IP-SMD-5PIN-10MM-A	96#	HR-IP-SMD-5PIN-10MM-C
97#	HR-IP-SMD-2PIN-12MM-B	98#	HR-IP-SMD-2PIN-12MM-A	99#	HR-IP-SMD-2PIN-12MM-C
100#	HR-IP-SMD-3PIN-12MM-B	101#	HR-IP-SMD-3PIN-12MM-A	102#	HR-IP-SMD-3PIN-12MM-C
103#	HR-IP-SC-4PIN-12MM-B	104#	HR-IP-SC-4PIN-12MM-A	105#	HR-IP-SC-4PIN-12MM-C
106#	HR-IP-COB-5PIN-12MM-B	107#	HR-IP-COB-5PIN-12MM-A	108#	HR-IP-COB-5PIN-12MM-C
109#	HR-IP-SMD-5PIN-12MM-B	110#	HR-IP-SMD-5PIN-12MM-A	111#	HR-IP-SMD-5PIN-12MM-C
112#	HR-IP-SMD-6PIN-12MM-B	113#	HR-IP-SMD-6PIN-12MM-A	114#	HR-IP-SMD-6PIN-12MM-C

Specification For Waterproof Puncture Version LED Strip Connector

Strip to Strip Series

Waterproof puncture series light strip connector is a transparent PC material connector, mainly suitable for casing waterproof led strip/full glue filling led strip/silicone extrusion led strip. It has the characteristics of easy installation, reliable connection, glue-free connection and reusability.

1. Naming Rule

2. Item No.

72# HR-IP-SC-2PIN-8MM-A

Strip-to-strip, mainly suitable for waterproof COB & SMD strips, 8mm width PCB, 2PIN single color

75# HR-IP-SC-3PIN-8MM-A

Strip-to-strip, mainly suitable for waterproof COB & SMD strips, 8mm width PCB, 3PIN CCT color

78# HR-IP-SC-2PIN-10MM-A

Strip-to-strip, mainly suitable for waterproof COB & SMD strips, 10mm width PCB, 2PIN single color

81# HR-IP-SMD-2PIN-10MM-A

Strip-to-strip, mainly suitable for waterproof SMD strips, 10mm width PCB, 2PIN SMD

84# HR-IP-SMD-3PIN-10MM-A

Strip-to-strip, mainly suitable for waterproof SMD strips, 10mm width PCB, 3PIN single color

87# HR-IP-COB-4PIN-10MM-A

Strip-to-strip, mainly suitable for waterproof CCT & RGB COB strips, 10mm width PCB, 4PIN

92# HR-IP-SMD-4PIN-10MM-A

Strip-to-strip, mainly suitable for waterproof SMD strips, 10mm width PCB, 4PIN SMD

95# HR-IP-SMD-5PIN-10MM-A

Strip-to-strip, mainly suitable for waterproof SMD strips, 10mm width PCB, 5PIN SMD

98# HR-IP-SMD-2PIN-12MM-A

Strip-to-strip, mainly suitable for waterproof SMD strips, 12mm width PCB, 2PIN SMD

101# HR-IP-SMD-3PIN-12MM-A

Strip-to-strip, mainly suitable for waterproof SMD strips, 12mm width PCB, 3PIN CCT color

104# HR-IP-SC-4PIN-12MM-A

Strip-to-strip, mainly suitable for waterproof COB & SMD strips, 12mm width PCB, 4PIN RGB color

107# HR-IP-COB-5PIN-12MM-A

Strip-to-strip, mainly suitable for waterproof COB strips, 12mm width PCB, 5PIN RGBW color

110# HR-IP-SMD-5PIN-12MM-A

Strip-to-strip, mainly suitable for waterproof SMD strips, 12mm width PCB, 5PIN SMD

113# HR-IP-SMD-6PIN-12MM-A

Strip-to-strip, mainly suitable for waterproof SMD strips, 12mm width PCB, 6PIN SMD

3. Product advantages

High transparent PC material, good light transmission.
Seamless connection, continuous light source uninterrupted.
Snap-fastened for easy installation and reusability.

4. Instruction

(The picture shows the 2pin operation, refer to this The operation of 3~6pin products is the same.)

Prepare led strip

Take the COB light strip 2PIN as an example, the middle of the exposed copper foil is cut and broken

Push the led strip into the bottom of the transparent plastic core slot.

The transparent rubber core is installed in the slots on both sides of the shell.

The transparent rubber core with the led strip is pressed down until the two sides of the shell are buckled upside down to be qualified.

Note: The led strip should be pushed into the bottom of the transparent plastic core and then pressed and pierced for conduction. If it is not in place, it may not be connected.

The other side is installed and pressed in the same way.

Finished

Note: For SMD-5PIN and 6PIN products, due to the large number of PINs, the pressing force is large, and auxiliary tools can be used to clamp them (the clamping position should not be at the terminal position, but should be at the edge of the transparent plastic core).

Finished

Note: The picture shows the operation of COB-2pin model, and the operation of COB&SMD 3~6pin products is the same as this method.

5. Description of technical parameters:

5.1 Technical requirements

Rated current: AWG20 6A Max, AWG22 4A Max

Rated voltage: 5V/9V/12V/18V/24V/36V/48V

Withstand voltage: 500V

Temperature resistance: 80?

Working temperature: -20? ~ +80?

Salt spray test: neutral salt spray 24H

Allowable humidity: 15%~90%

Applicable light strip specifications: bare board COB light strip, or bare board SMD light strip with PIN pin spacing adapted

5.2 Yiford PCB Circuit Laying Rules

?Before purchasing connectors, please ensure that the led strip meets the following wiring requirements. Customer complaints caused by PCB wiring problems are not covered by the warranty.?:

No.1 copper foil design needs to be laid in a straight line within this range;
No.2 Cut the middle line;
No.3 copper foil center distance design, the center symmetry with the outer width of the light strip is 0.2 Max;
No.4 light strip design thickness 0.30 Max
No.5 lamp beads allow the maximum height, the tolerance range is ±0.2;
No.6 total height after sticking adhesive: 0.55±0.1;
No. 7 Minimum size of lamp bead laying position;
No. 8 Design requirements for the outer width of the light strip;

All lamp beads and the outer width of the lamp strip have a center symmetry of 0.5 Max;

6. Product Size

8mm strip to strip 2PIN connector?HR-IP-SC-2PIN-8MM-A?

10mm Series connector

Remark:

The marked view is the SMD-4PIN benchmark, and other products have the same dimensions except for the number of PINs;
Each product is equipped with 1 shell and 2 transparent plastic cores. According to the example of SMD-4PIN, other products are the same.

SMD 12mm strip to strip connector

SMD-5PIN?HR-S-SMD-5PIN-12MM-A

SMD-6PIN?HR-S-SMD-6PIN-12MM-A