Hae
Sulje tämä hakukenttä.

Paras valaistus täällä

Kaikki haluamasi löytyy täältä

12mm-2pin
12mm-2pin
12mm-2pin
12mm-2pin

97# LED Strip lights connector 12mm 2pin strip to wire

Kategoria Tunnisteet , , ,
5/5
Kysy Lainaus

paras hinta

Tehtaan suora hinta

uusin teknologia

uusi tuotantoprosessi

Paras myynnin jälkeinen

Tehtaan tekninen palvelu

Haluatko ostaa nyt? Osta täältä, tuhansia tuotteita verkossa.

Ostaa verkosta

97# LED Strip lights connector 12mm 2pin strip to wire

Kuvaus

led strip lights connector

IP20 Mini Crystal Series

EI.TUOTE NRO.EI.TUOTE NRO.EI.TUOTE NRO.EI.TUOTE NRO.
1#HR-S-SC-2PIN-5MM-B2#HR-S-SC-2PIN-5MM-A3#HR-S-SC-2PIN-5MM-C4#HR-S-SC-2PIN-5MM-D
5#HR-S-SC-3PIN-5MM-B6#HR-S-SC-3PIN-5MM-A7#HR-S-SC-3PIN-5MM-C8#HR-S-SC-3PIN-5MM-D
9#HR-S-SC-2PIN-8MM-B10#HR-S-SC-2PIN-8MM-A11#HR-S-SC-2PIN-8MM-C12#HR-S-SC-2PIN-8MM-D
13#HR-S-SC-3PIN-8MM-B14#HR-S-SC-3PIN-8MM-A15#HR-S-SC-3PIN-8MM-C16#HR-S-SC-3PIN-8MM-D
17#HR-S-SC-4PIN-8MM-B18#HR-S-SC-4PIN-8MM-A19#HR-S-SC-4PIN-8MM-C20#HR-S-SC-4PIN-8MM-D
21#HR-S-SC-2PIN-10MM-B22#HR-S-SC-2PIN-10MM-A23#HR-S-SC-2PIN-10MM-C24#HR-S-SC-2PIN-10MM-D
25#HR-S-SMD-2PIN-10MM-B26#HR-S-SMD-2PIN-10MM-A27#HR-S-SMD-2PIN-10MM-C28#HR-S-SMD-2PIN-10MM-D
29#HR-S-SMD-3PIN-10MM-B30#HR-S-SMD-3PIN-10MM-A31#HR-S-SMD-3PIN-10MM-C32#HR-S-SMD-3PIN-10MM-D
33#HR-S-COB-3PIN-10MM-B34#HR-S-COB-4PIN-10MM-A35#HR-S-COB-3PIN-10MM-C36#HR-S-COB-4PIN-10MM-D
37#HR-S-COB-4PIN-10MM-B34#HR-S-COB-4PIN-10MM-A38#HR-S-COB-4PIN-10MM-C36#HR-S-COB-4PIN-10MM-D
39#HR-S-SMD-4PIN-10MM-B40#HR-S-SMD-4PIN-10MM-A41#HR-S-SMD-4PIN-10MM-C42#HR-S-SMD-4PIN-10MM-D
43#HR-S-SMD-5PIN-10MM-B44#HR-S-SMD-5PIN-10MM-A45#HR-S-SMD-5PIN-10MM-C46#HR-S-SMD-5PIN-10MM-D
47#HR-S-SMD-2PIN-12MM-B48#HR-S-SMD-2PIN-12MM-A49#HR-S-SMD-2PIN-12MM-C50#HR-S-SMD-2PIN-12MM-D
51#HR-S-SMD-3PIN-12MM-B52#HR-S-SMD-3PIN-12MM-A53#HR-S-SMD-3PIN-12MM-C54#HR-S-SMD-3PIN-12MM-D
55#HR-S-SC-4PIN-12MM-B56#HR-S-SC-4PIN-12MM-A57#HR-S-SC-4PIN-12MM-C58#HR-S-SC-4PIN-12MM-D
59#HR-S-SMD-5PIN-12MM-B60#HR-S-SMD-5PIN-12MM-A61#HR-S-SMD-5PIN-12MM-C62#HR-S-SMD-5PIN-12MM-D
63#HR-S-COB-5PIN-12MM-B64#HR-S-COB-5PIN-12MM-A65#HR-S-COB-5PIN-12MM-C66#HR-S-COB-5PIN-12MM-D
67#HR-S-SMD-6PIN-12MM-B68#HR-S-SMD-6PIN-12MM-A69#HR-S-SMD-6PIN-12MM-C70#HR-S-SMD-6PIN-12MM-D
115#HR-S-SC-2PIN-8MM-E116#HR-S-SMD-6PIN-12MM-E

Waterproof Series

EI.TUOTE NRO.EI.TUOTE NRO.EI.TUOTE NRO.
71#HR-IP-SC-2PIN-8MM-B
72#HR-IP-SC-2PIN-8MM-A73#HR-IP-SC-2PIN-8MM-C
74#HR-IP-SC-3PIN-8MM-B75#HR-IP-SC-3PIN-8MM-A76#HR-IP-SC-3PIN-8MM-C
77#HR-IP-SC-2PIN-10MM-B78#HR-IP-SC-2PIN-10MM-A79#HR-IP-SC-2PIN-10MM-C
80#HR-IP-SMD-2PIN-10MM-B81#HR-IP-SMD-2PIN-10MM-A82#HR-IP-SMD-2PIN-10MM-C
83#HR-IP-SMD-3PIN-10MM-B84#HR-IP-SMD-3PIN-10MM-A85#HR-IP-SMD-3PIN-10MM-C
86#HR-IP-COB-3PIN-10MM-B87#HR-IP-COB-4PIN-10MM-A88#HR-IP-COB-3PIN-10MM-C
89#HR-IP-COB-4PIN-10MM-B87#HR-IP-COB-4PIN-10MM-A90#HR-IP-COB-4PIN-10MM-C
91#HR-IP-SMD-4PIN-10MM-B92#HR-IP-SMD-4PIN-10MM-A93#HR-IP-SMD-4PIN-10MM-C
94#HR-IP-SMD-5PIN-10MM-B95#HR-IP-SMD-5PIN-10MM-A96#HR-IP-SMD-5PIN-10MM-C
97#HR-IP-SMD-2PIN-12MM-B98#HR-IP-SMD-2PIN-12MM-A99#HR-IP-SMD-2PIN-12MM-C
100#HR-IP-SMD-3PIN-12MM-B101#HR-IP-SMD-3PIN-12MM-A102#HR-IP-SMD-3PIN-12MM-C
103#HR-IP-SC-4PIN-12MM-B104#HR-IP-SC-4PIN-12MM-A105#HR-IP-SC-4PIN-12MM-C
106#HR-IP-COB-5PIN-12MM-B107#HR-IP-COB-5PIN-12MM-A108#HR-IP-COB-5PIN-12MM-C
109#HR-IP-SMD-5PIN-12MM-B110#HR-IP-SMD-5PIN-12MM-A111#HR-IP-SMD-5PIN-12MM-C
112#HR-IP-SMD-6PIN-12MM-B113#HR-IP-SMD-6PIN-12MM-A114#HR-IP-SMD-6PIN-12MM-C
led strip lights connector

Spec for Waterproof Puncture Version led strip

Strip to Strip with wires Series

Strip to wires Series

Waterproof puncture series light strip connector is a transparent PC material connector, mainly suitable for casing waterproof led strip/full glue filling led strip/silicone extrusion led strip. It has the characteristics of easy installation, reliable connection, glue-free connection and reusability.

1. Naming Rule

??1

2. Item No. (Strip to Wires [with 15cm wires ] )

3

71# HR-IP-SC-2PIN-8MM-B

Strip-to-wires, mainly suitable for waterproof COB & SMD strips, 8mm PCB, 2PIN, 20AWG

4

74# HR-IP-SC-3PIN-8MM-B

Strip-to-wires, mainly suitable for waterproof COB & SMD strips, 8mm PCB, 3PIN, 20AWG

5

77# HR-IP-SC-2PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD&COB strips, 10mm PCB, 2PIN , 20AWG

6

80# HR-IP-SMD-2PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 2PIN , 20AWG

7

83# HR-IP-SMD-3PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 3PIN , 20AWG

8

86# HR-IP-COB-3PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 10mm PCB, 3PIN CCT color , 20AWG

9

89# HR-IP-COB-4PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 4PIN RGB color , 20AWG

10

91# HR-IP-SMD-4PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 4PIN , 20AWG

11

94# HR-IP-SMD-5PIN-10MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 5PIN , 20AWG

12

97# HR-IP-SMD-2PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 2PIN , 20AWG

13

100# HR-IP-SMD-3PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 3PIN , 20AWG

14

103# HR-IP-SC-4PIN-12MM-B

Strip-to-wires, mainly suitable for waterproof COB & SMD strips, 12mm PCB, 4PIN, 20AWG

15

106# HR-IP-COB-5PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 12mm PCB, 5PIN , 20AWG

16

109# HR-IP-SMD-5PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 5PIN , 20AWG

17

112# HR-IP-SMD-6PIN-12MM-B

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 6PIN , 20AWG

3. Item No. (Strip to Strip [with 15cm wires ] )

18

73# HR-IP-SC-2PIN-8MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB & SMD strips, 8mm width PCB, 2PIN , 20AWG

19

76# HR-IP-SC-3PIN-8MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB & SMD strips, 8mm width PCB, 3PIN , 20AWG

20

79# HR-IP-SC-2PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB & SMD strips, 10mm width PCB, 2PIN , 20AWG

21

82# HR-IP-SMD-2PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 2PIN , 20AWG

22

85# HR-IP-SMD-3PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 3PIN , 20AWG

23

88# HR-IP-COB-3PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 10mm PCB, 3PIN CCT color , 20AWG

24

90# HR-IP-COB-4PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 10mm PCB, 4PIN RGB color , 20AWG

25

93# HR-IP-SMD-4PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 4PIN , 20AWG

26

96# HR-IP-SMD-5PIN-10MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 10mm PCB, 5PIN , 20AWG

27

102# HR-IP-SMD-3PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 3PIN , 20AWG

28

105# HR-IP-SC-4PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB & SMD strips, 12mm width PCB, 4PIN , 20AWG

29

108# HR-IP-COB-5PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof COB strips, 12mm PCB, 5PIN , 20AWG

30

111# HR-IP-SMD-5PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 5PIN , 20AWG

31

114# HR-IP-SMD-6PIN-12MM-C

Strip-to-strip (with wires 15cm), mainly suitable for waterproof SMD strips, 12mm PCB, 6PIN , 20AWG

4. Product advantages

32

COB Series

33

SMD Series

34

COB Series

35

SMD Series

36

COB Series

37

SMD Series

5. Instruction

  1. Prepare led strip
42
  1. Take the COB light strip 2PIN as an example, the middle of the exposed copper foil is cut and broken
43
  1. Push the led strip into the bottom of the transparent plastic core slot.
44
  1. After the transparent rubber core is loaded into the notches on both sides of the shell, press it from top to bottom, and press the transparent rubber core with the light strip down until the two sides of the shell are buckled upside down to be qualified.
45 1
  1. Finished

Note: The led strip should be pushed into the bottom of the transparent plastic core and then pressed and pierced for conduction. If it is not in place, it may not be connected.

46 1
  1. COB type installation finished product, the other side of the double-ended connector is installed and pressed in the same way.
47

Note: For SMD-5PIN and 6PIN products, due to the large number of PINs, the pressing force is large, and auxiliary tools can be used to clamp them (the clamping position should not be at the terminal position, but should be at the edge of the transparent plastic core).

48

Finished images for SMD

Note: The picture shows the operation of COB-2pin model, and the operation of COB&SMD 2~6pin products is the same as this method.

6. Description of technical parameters:

6.1 Technical requirements

Rated current: AWG20 6A Max, AWG22 4A Max

Rated voltage: 5V/9V/12V/18V/24V/36V/48V

Withstand voltage: 500V

Temperature resistance: 80?

Working temperature: -20? ~ +80?

Salt spray test: neutral salt spray 24H

Allowable humidity: 15%~90%

Applicable light strip specifications: bare board COB light strip, or bare board SMD light strip with PIN pin spacing adapted

6.2 Yiford PCB Circuit Laying Rules

?Before purchasing connectors, please ensure that the led strip meets the following wiring requirements. Customer complaints caused by PCB wiring problems are not covered by the warranty.?:

  • No.1 copper foil design needs to be laid in a straight line within this range;
  • No.2 Cut the middle line;
  • No.3 copper foil center distance design, the center symmetry with the outer width of the light strip is 0.2 Max;
  • No.4 light strip design thickness 0.30 Max
  • No.5 lamp beads allow the maximum height, the tolerance range is ±0.2;
  • No.6 total height after sticking adhesive: 0.55±0.1;
  • No. 7 Minimum size of lamp bead laying position;
  • No. 8 Design requirements for the outer width of the light strip;

All lamp beads and the outer width of the lamp strip have a center symmetry of 0.5 Max;

49

HR-S-SC-5MM-2PIN

50

HR-S-SC-8MM-2PIN

51

HR-S-SC-10MM-2PIN

52

HR-S-SMD-10MM-3PIN

53

HR-S-COB-10MM-3PIN

54

HR-S-COB-10MM-4PIN

55

HR-S-SMD-10MM-4PIN

56

HR-S-SMD-10MM-5PIN

57

HR-S-SMD-12MM-5PIN

58

HR-S-SMD-12MM-6PIN

7. Product Size

7.1 8mm Strip to wires 2PIN?HR-IP-SC-2PIN-8MM-B?

59

7.2 Strip to strip (With 15cm wires) 2PIN?HR-IP-SC-2PIN-8MM-C?

60

7.3 10mm series single-ended connectors (see Table 1 for model numbers)

61
62
63

Note:

  1. 1.The marked view is the SMD-4PIN benchmark, and other products have the same dimensions except for the number of PINs;
  2. Each product has a shell with a transparent plastic core, according to the SMD-4PIN example, other products are the same

7.4 10mm Series (Strip to Strip with wires)

64
65
66

Note:

  1. 1.The marked view is the SMD-4PIN benchmark, and other products have the same dimensions except for the number of PINs;
  2. Each product has 1 shell with 2 transparent plastic cores, according to the SMD-4PIN example, other products are the same

SMD 12mm Strip to wires

SMD-5PIN?HR-IP-SMD-5PIN-12MM-B

SMD-6PIN?HR-IP-SMD-6PIN-12MM-B

67

Note:

  1. 1.The marked view is the 5PIN benchmark, and the 6PIN is the same except for the number of PINs;
  2. Each product has a shell with a transparent plastic core, according to the SMD-5PIN example, the 6PIN products are the same

SMD 12mm Strip to Strip with 15cm wires

SMD-5PIN?HR-IP-SMD-5PIN-12MM-C

SMD-6PIN?HR-IP-SMD-6PIN-12MM-C

68

Note:

  1. 1.The marked view is the 5PIN benchmark, and the 6PIN is the same except for the number of PINs;
  2. Each product has 1 shell with 2 transparent plastic cores, according to the SMD-5PIN example, the 6PIN products are the same

If you want to know more about light strips, you can follow my youtube channel or facebook. Of course, you can also email us directly.

Tutustu myös

Asiakaspalaute

Erik Trevino
Erik Trevino
Insinööripäällikkö
Lue lisää
Aikaisemmin valoliuskaa asennettaessa meni paljon materiaaleja hukkaan, koska hitsaus leikkaamisen jälkeen on erittäin hankala asia. Koska käytetään YIFORDin liitintä, materiaalit eivät enää mene hukkaan, ja asennusaikaa ja työvoimakustannuksia säästyy. Kiitos YIFORDin hyvistä tuotteista, jotka ovat erittäin hyödyllisiä.
Peter Dickerson
Peter Dickerson
toimitusjohtaja
Lue lisää
En voi täysin ilmaista kuinka mahtavia nämä valot ovat! ostimme 24v cob led-nauhat led-kanavajärjestelmällä, se toimii odotetusti, melko kirkas, hyvä värintoisto, pinta on hienolla pinnoitteella, joka hajottaa valoa hieman. Insinöörimme rakastavat sitä niin paljon! Hyvä arvo! Ne ovat todella kirkkaita työstetty, Great minun projekti Onko mitä maksat mitä saat täällä Erinomainen tuote.
Bill Hiskett
Bill Hiskett
Ostopäällikkö
Lue lisää
Olemme Romanian ammattimainen led-valaisimien jakelija, yrityksellä on 12 vuoden toimintahistoria. Monet asiakkaamme käyttävät led-nauhavaloja keittiön kaapissa, autoissa, olohuoneessa, portaissa, toimistossa jne. Ja monet heistä tarvitsevat led-valotarvikkeita. On erittäin ilo löytää Yiford, he tarjoavat meille erittäin ammattitaitoista palvelua ja laadukkaita tuotteita. Jos tarvitset led-valaisimien tukkumyyntiä Kiinasta? Yiford on yksi Kiinan parhaista led-valovalmistajista.
Jason Moeller
Jason Moeller
Rakennussuunnittelija
Lue lisää
Toteutamme monia projekteja ostoskeskuksiin, yritysten esittelytiloihin Euroopassa. Joskus projekti vaatii monia räätälöintituotteita. kuten cob led-nauhavalot ja led-alumiiniprofiili. tarvitsevat eri kokoja, eri tehoja, erilaisia led-lisävarusteita. Yiford on ammattimainen johtava valmistaja. He maksavat kärsivällisesti tilauksiani. Ei väliä jäähdytyselementin alumiinista, led-alumiinipuristustuotteista, diffuusorin suojuksesta, päätykappaleista ja led-lineaarivalon asennustarvikkeista. He voivat tehdä sen hyvin.
Dylan Bowles
Dylan Bowles
Valmistussuunnittelija
Lue lisää
Valmistamme led-huonevaloa Isossa-Britanniassa. Viiden vuoden yhteistyön ansiosta tiedämme, että Yiford on luotettava led-huonevalovalmistaja Kiinassa. He voivat tarjota saman säiliön samanvärisiä led-nauhavaloja kaikissa tilauksissasi. Yifordissa on erittäin mukavat led-nauhat, sitä kutsutaan COB-led-nauhavaloksi, erilainen kuin SMD-LED-nauhat, se on kirkkaampi, tasaisella valaistuksella, tehokkaampi valaistus, Yiford-juotettamattomilla liittimillä, joten helppo asentaa tuotteisiimme, hyvä laatu Ohjaus anna meidän edessä asiakkaiden voitti enemmän kunniaa. Kiitos!
Michael Feron
Michael Feron
Valon jakelija
Lue lisää
Ostan joustavia cob led-nauhavaloja ja led-kanavajärjestelmiä Yifordista niin monta kertaa. Meillä on monia upeita led-nauhavaloideoita Yifordilta. Se on hyvin tehty pyynnöstäni. Joskus yksi projekti tarvitsee monia led-valotarvikkeita, kuten led-liitin, led-ohjain, led-virtalähde, silikoni-LED-kanavajärjestelmä, led-alumiiniprofiili. Erikoismuotoilu, OEM-merkki, kaikki toimivat hyvin. Pidämme Yifordia hyvänä led-valotoimittajana.
Edellinen
Seuraava
Ota meihin yhteyttä
yiford logo

Hongxin Industry, Songgang Baoan, Shenzhen, Kiina.518105
Puh/Whatsapp/Wechat:
0086-13922882463
info@yiford.com

Pysyä yhteydessä

Pysy ajan tasalla. Lähetämme sinulle säännöllisesti sähköpostia päivityksistä, tuoteinnovaatioista ja tapahtumista.

Facebook Viserrys Youtube Linkedin Instagram Pinterest Silmä
Etsi videoita
Etsi tuotteita

Tuote

Luettelo

Pikalinkit
Ostoskärry
fiFinnish
en_USEnglish de_DEGerman fr_FRFrench ru_RURussian es_ESSpanish hi_INHindi arArabic pt_PTPortuguese jaJapanese ro_RORomanian cs_CZCzech elGreek hu_HUHungarian it_ITItalian pl_PLPolish tr_TRTurkish ko_KRKorean sv_SESwedish fiFinnish
Vieritä ylös
Tehdään yhteistyötä
Haluaisimme kuulla sinusta
97# LED Strip lights connector 12mm 2pin strip to wire